D-Link Fast Ethernet Switch, 16 20 Port SmartPro Managed Stackable w/ 2 Gigabit SFP Ports & 2 10GbE SFP+ Ports (DGS-1510-20), Black
, Black)
$405.81
- Security features include IP-MAC-Port binding, Safeguard Engine, ACL, and ARP Spoofing Prevention
- Sixteen (16) 10/100/1000BASE-T Ports
- Two (2) 10-Gigabit SFP+ Ports
- Ideal for SMB networks with large bandwidth demands requiring 10G uplinks, Physical Stacking, and L3 Static Routing
- IPv6 management / IPv6 Neighbor Discovery / IPv6 static routing. Auto negotiation
- Two (2) Gigabit SFP Ports
- Advanced management and security features similar to those of a fully managed switch, but at the price of a smart switch
Sold：193 Wished: 18 Followed: 73
DGS-1510-20: 20-Port Gigabit Stackable SmartPro Switch
The DGS-1510-20 offers D-Link’s latest generation of SmartPro switches with 10G port connectivity, making the switch ideal for deployment in SME/SMB networks.
Read more
|
|
|
|
|
|---|---|---|---|
QoS, Bandwidth ControlThe DGS-1510-20 supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN technology consolidates data and surveillance video transmission through a single SmartPro switch, sparing businesses the expense of maintaining expensive dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority. |
IPv6 ReadyThe DGS-1510-20 is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-1510-20 also supports an IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks. Finally, the DGS-1510-20 is certified to be IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments. |
Energy SavingThe DGS-1510-20 is capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the switch will automatically decrease the power usage when traffic is low. For environments not fully supporting the standard, DGS-1510-20 offers other advanced power-saving settings including port shutoff, LED shutoff, and system hibernation based on custom scheduling profiles. |
Limited Lifetime WarrantyD-Link offers a Limited Lifetime Warranty on the DGS-1510-20 Gigabit Stackable SmartPro switch to further its commitment to product quality and long-term customer confidence. |
Read more
Product Highlights
Versatile Management
The DGS-1510-20 provides a D-Link Network Assistant Utility and a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the SmartPro Switches. Switches within the same L2 network segment that are connected to the user’s PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1510-20 also supports D-View 7 and a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 7 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. CLI management of the switch is possible via console port and Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, and firmware with ease.
Secure your Network
D-Link’s innovative Safeguard Engine protects the switch against traffic flooding caused by virus attacks. The switch also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510-20 includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.
10G SFP+ Stacking/Uplink Ports
Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Ethernet Gigabit Ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510-20 with cost efficiency. Users can mix any of the DGS-1510 SmartPro models in a single stack to allow simultaneous and easy configuration, management and troubleshooting.
Key Features
- Single IP Management (Virtual Stacking), stack up to 32 devices
- Physical Stacking via 2 10G ports, stack up to 6 devices
- Static Routing
- IPv6 Management Support
- Auto Surveillance VLAN
- Auto Voice VLAN
- Loopback Detection automatically disables a port or VLAN when a loop is detected
- Configurable MDI/MDIX
- LLDP/LLDP-MED
- Access Control List
- D-Link Safeguard Engine
- Port Security
- ARP Spoofing Prevention
- IP-MAC-Port Binding
- DoS Attack Prevention
- D-Link Network Assistant Utility or Multi-language Web-based GU
- Built-in SNMP MIB for remote NMS (D-View 7)
- Full CLI via console port
- IPv4/IPv6 Stack
- Dual Image
- IEEE 802.3az Energy Efficient Ethernet
- D-Link Green 3.0 power-saving features
Read more
|
|
|
|
|---|---|---|
Layer 3 Traffic ManagementThe DGS-1510-20 supports advanced traffic management features, including static routing. With static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. Because the switch can manage internal routing, the network router can be assigned to handle external traffic routing only. |
Extensive Layer 2 FeaturesThe DGS-1510-20 is equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality. |
Single IP ManagementThe DGS-1510-20 supports virtual stacking via D-Link’s Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP address. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP addresses needed in the network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialized stacking cables and removes distance barriers that can limit topology options when using other stacking technology. |
Read more
|
DGS-1510-20 |
DGS-1510-28 |
DGS-1510-28P |
DGS-1510-28X |
DGS-1510-28XMP |
DGS-1510-52 |
|
|---|---|---|---|---|---|---|
| Number of Ports | 16 x 10/100/1000, 2 x Mbps Gigabit SFP, and 2 x 10G SFP+ | 24 x 10/100/1000, 2 x Mbps Gigabit SFP, and 2 x 10G SFP+ | 24 x 10/100/1000, 2 x Mbps Gigabit SFP, and 2 x 10G SFP+ | 24 x 10/100/1000 and 4 x 10G SFP+ | 24 x 10/100/1000 and 4 x 10G SFP+ | 48 x 10/100/1000, 2 x Mbps Gigabit SFP, and 2 x 10G SFP+ |
| Switching Capacity | 76 Gbps | 92 Gbps | 92 Gbps | 128 Gbps | 128 Gbps | 140 Gbps |
| Transmission Method | Store-and-forward | Store-and-forward | Store-and-forward | Store-and-forward | Store-and-forward | Store-and-forward |
| PoE | – | – | Yes | – | Yes | – |
| Maximum 64 bytes Packet Forwarding Rate | 56.54 Mpps | 68.45 Mpps | 68.45 Mpps | 95.24 Mpps | 95.24 Mpp | 104.16 Mpps |
| Packet Buffer Memory | 1.5 MB per device 1 | 1.5 MB per device | 1.5 MB per device | 1.5 MB per device | 1.5 MB per device | 3 MB per device |
| Safety | cUL, CB | cUL, CB | cUL, CB | cUL, CB | cUL, CB | cUL, CB |
| MTBF | 882,152 hr | 516,593 hr | 275,428 hr | 516,593 hr | 274,796 hr | 433,434 hr |
| VLAN | Yes | Yes | Yes | Yes | Yes | Yes |
| Quality of Service (QoS) | Yes | Yes | Yes | Yes | Yes | Yes |
by Miss Beard
The prices are affordable without sacrificing quality with this merchant.